10W-1500W DC Flip Chip Cob LED, 3 Years Warranty, Ce Rohs
• Efficacy of >130 lm/W typical for 6000K, 70CRI(PB)
• Efficacy of 140 lm/W typical for 6000K, 70CRI(P6)
• Copper base, thermal conductivity is 122-176W/(m·K) • Emitting
diameter against 80kg pressure
• Minimum 70, 80 CRI options
• ENERGY STAR® / ANSI compliant color binning structure with 3 and
5 SDCM standard
• More energy efficient than incandescent, halogen and fluorescent
lamps
• Product series and company logo on the front • RoHS compliant
2 Advantages
• High stability for outdoor application
• Significantly reduced thermal resistance and increased operating
temperature
• Uniform, consistent white light
• Lower operating cost • Easy to use with daylight and motion
detectors to enable increased energy saving
• Reduced maintenance cost • Environmentally friendly, no disposal
issue
The part number designation for TYF Outdoor (OD) Series LED arrays
is explained as follows:
| Part Number | Typical Power (W) | Nominal CCT (K) | Minimum Pulsed Flux (lm) | Typical Pulsed Flux (lm) | Typical Voltage (V) | Nominal Current (mA) | Typical Efficacy (lm/W) |
| ML13070302P530E*7 | 3.1 | 3000 K | 377 | 419 | 9.6 | 320 | 135 |
| ML13070302P535E*7 | 3.1 | 3500 K | 382 | 425 | 9.6 | 320 | 137 |
| ML13070302P540E*7 | 3.1 | 4000 K | 385 | 428 | 9.6 | 320 | 138 |
| ML13070302P550E*7 | 3.1 | 5000 K | 388 | 431 | 9.6 | 320 | 139 |
| ML13070302P557E*7 | 3.1 | 5700 K | 391 | 434 | 9.6 | 320 | 140 |
| ML13070302P565E*7 | 3.1 | 6500 K | 388 | 431 | 9.6 | 320 | 139 |
| ML13070302P522E*8 | 3.1 | 2200 K | 304 | 338 | 9.6 | 320 | 109 |
| ML13070302P527E*8 | 3.1 | 2700 K | 326 | 363 | 9.6 | 320 | 117 |
| ML13070302P530E*8 | 3.1 | 3000 K | 338 | 375 | 9.6 | 320 | 121 |
| ML13070302P535E*8 | 3.1 | 3500 K | 346 | 384 | 9.6 | 320 | 124 |
| ML13070302P540E*8 | 3.1 | 4000 K | 352 | 391 | 9.6 | 320 | 126 |
| ML13070302P550E*8 | 3.1 | 5000 K | 357 | 397 | 9.6 | 320 | 128 |
| ML13070302P557E*8 | 3.1 | 5700 K | 363 | 403 | 9.6 | 320 | 130 |
| ML13070302P565E*8 | 3.1 | 6500 K | 357 | 397 | 9.6 | 320 | 128 |
| ML13070302P522E*9 | 3.1 | 2200 K | 262 | 291 | 9.6 | 320 | 94 |
| ML13070302P527E*9 | 3.1 | 2700 K | 285 | 316 | 9.6 | 320 | 102 |
| ML13070302P530E*9 | 3.1 | 3000 K | 296 | 329 | 9.6 | 320 | 106 |
| ML13070302P535E*9 | 3.1 | 3500 K | 304 | 338 | 9.6 | 320 | 109 |
| ML13070302P540E*9 | 3.1 | 4000 K | 310 | 344 | 9.6 | 320 | 111 |
| ML13070302P550E*9 | 3.1 | 5000 K | 315 | 350 | 9.6 | 320 | 113 |
| ML13070302P557E*9 | 3.1 | 5700 K | 321 | 357 | 9.6 | 320 | 115 |
5.1 Color Binning Information
Figure 1: Graph of Test Bins in xy Color Space (Pulsed Test
Conditions, Tj = 25°C)
CIE1931-x
Table 38: 2-Step to 5-step MacAdam ellipse color bin definitions
for TYF CoB Core Range
Nominal CCT | Center Point | MAJOR AXIS (a , b) | Ellipse
Rotation Angel,θ |
| X | Y | 2-Step | 3-Step | 5-Step |
| 2200K | 0.5018 | 0.4153 | (0.0048 , 0.0027) | (0.0072, 0.0041) | (0.0120, 0.0067) | 39.9 |
| 2500K | 0.4806 | 0.4141 | (0.0050, 0.0027) | (0.0076, 0.0041) | (0.0126, 0.0068) | 53.1 |
| 2700K | 0.4575 | 0.4101 | (0.0053, 0.0027) | (0.0080, 0.0041) | (0.0133, 0.0068) | 54.1 |
| 3000K | 0.4338 | 0.4030 | (0.0057, 0.0028) | (0.0086, 0.0042) | (0.0142, 0.0069) | 53.7 |
| 3500K | 0.4073 | 0.3917 | (0.0062, 0.0028) | (0.0093, 0.0041) | (0.0155, 0.0069) | 54.0 |
| 4000K | 0.3818 | 0.3797 | (0.0063, 0.0027) | (0.0093, 0.0042) | (0.0157, 0.0068) | 53.4 |
| 5000K | 0.3447 | 0.3553 | (0.0054, 0.0024) | (0.0081, 0.0035) | (0.0135, 0.0059) | 59.8 |
| 5700K | 0.3290 | 0.3417 | (0.0048, 0.0021) | (0.0072, 0.0032) | (0.0119, 0.0052) | 58.8 |
| 6500K | 0.3123 | 0.3282 | (0.0044, 0.0018) | (0.0066, 0.0027) | (0.0110, 0.0045) | 58.1 |
6.1 Table 39: Maximum Ratings
Notes for Table 12:
- Driven the arrays at higher currents however lumen maintenance may
be reduced.
- Proper current derating must be observed to maintain junction
temperature below the maximum
- Pulsed operation with a peak drive current equal to the stated peak
pulsed forward current is acceptable if the pulse on-time is ≤1ms
per cycle and the duty cycle is ≤10%
- Light emitting diodes are not designed to be driven in reverse
voltage and will not produce light under this condition. Maximum
rating provided for reference only.
Notes: 1. All dimension tolerance is ±0.2mm unless otherwise noted.
2. Tc measurement point at cathode
RECOMMENDED SOLDERING CONDITION
For manual soldering. Please use lead-free soldering and the
soldering shall be implemented using a soldering bit at a
temperature lower than 350C, and shall be finished within 3.5
seconds for one land. No external force shall be applied
to resin part while soldering is implemented. Next process of
soldering should be carried out after the product has
return to ambient temperature. CAUTION: TEMPERATURE CONTROL
Product Packing and Labeling
